X-Duty Cleaner
Product Description:
X-DUTY CLEANER is a multi-purpose non-water-based and non-acidic cleaner for engineering concrete, terracotta tile, cast stone, paving, limestone, brick, marble, granite, terrazzo and grout. X-DUTY CLEANER for lifting deep-seated stains and graffiti from most surfaces. The product is also excellent for the removal of the factory applied wax coating found on many porcelain tiles.
X-DUTY CLEANER is suitable for a wide variety of applications, including: building facades, floors, walls, swimming pool surrounds, patios, garages, kitchens and public and private entertaining areas.
1. ALWAYS TEST PRODUCT ON A SMALL AREA FIRST. Allow a 24-hour cure time. Check that the sealer does not discolour the surface.
2. Sweep surface to remove dust and dirt.
3. Use product undiluted directly from the container.
4. Apply solution to the surface using a clean white cloth and allow 60 seconds for penetration before lightly scrubbing using a natural bristled brush.
5. Wipe off excess using a clean white cloth to remove residue.
6. For stubborn deep-seated stains wet the surface with X-Duty Cleaner for two minutes and repeat steps three to 5.
7 Clean equipment with methylated spirits.
X-DUTY CLEANER is able to clean graffiti, grout haze and stains from surfaces; suitable for indoor and outdoor use, and easy to use with a low odour.
No Warranty Specified